DSpace Home
→
FAKÜLTELER
→
Diş Hekimliği Fakültesi
→
Protetik Diş Tedavisi
→
Browsing Protetik Diş Tedavisi by Author

Browsing Protetik Diş Tedavisi by Author "Dede, Dogu Omur"

Now showing items 1-20 of 27

Comparing the shear bond strength of veneering materials to the PAEKs after surface treatments

Kilic, Mustafa; Dede, Dogu Omur; Kucukekenci, Ahmet Serkan (BMC-LONDON, 2023)

BackgroundThis study aimed to evaluate the impact of various surface treatments on the shear bond strength (SBS) of polyetheretherketone (PEEK) and polyetherketoneketone (PEKK) polymers to indirect laboratory composite ...
Comparison of intraoral and laboratory scanners to an industrial-grade scanner while analyzing the fabrication trueness of polymer and titanium complete-arch implant-supported frameworks

Yilmaz, Burak; Dede, Dogu Omur; Donmez, Mustafa Borga; Kucukekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda Lang; Cakmak, Gulce (ELSEVIER SCI LTD-London, 2023)

Objectives: To compare the scans of different intraoral scanners (IOSs) and laboratory scanners (LBSs) to those of an industrial-grade optical scanner by measuring deviations of complete-arch implant-supported frameworks ...
Does Sterilization Affect the Push Out Bond Strength of Experimental Dentin Posts?

Dede, Dogu Omur; Sanal, Fatma Aye; Tulga, Ayca (UNIV COSTA RICA, FAC ODONTOLOGIA, CIUDAD UNIV RODRIGO FACIO, SAN JOSE, 2050, COSTA RICA, 2019)

The purpose of this preliminary study is to evaluate the push-out bond strength (PBS) of experimental dentin posts (EDPs) obtained from human and bovine teeth sterilized by autoclaving and gamma radiation. Eighty-four ...
Effect of brand and shade of resin cements on the final color of lithium disilicate ceramic

Ceylan, Gozlem; Dede, Dogu Omur; Yilmaz, Burak (MOSBY-ELSEVIER, 360 PARK AVENUE SOUTH, NEW YORK, NY 10010-1710 USA, 2017)

Statement of problem. Resin cements are available in various shades from different manufacturers. However, there is no standard for the optical properties of these cements, which may result in differences in the color of ...
Effect of different surface treatment methods on the surface roughness and color stability of interim prosthodontic materials

Dede, Dogu Omur; Koroglu, Aysegul; Sahin, Onur; Yilmaz, Burak (MOSBY-ELSEVIER, 360 PARK AVENUE SOUTH, NEW YORK, NY 10010-1710 USA, 2016)

Statement of problem. The effects of surface sealant agents on the surface roughness and color stability of interim crown materials are unknown. Purpose. The purpose of this in vitro study was to evaluate the effects ...
Effect of different surface treatments on the shear bond strength of PAEKs to composite resin

Kucukekenci, Ahmet Serkan; Dede, Dogu Omur; Kahveci, Cigdem (TAYLOR & FRANCIS LTD ABINGDON, 2021)

The present study aimed to evaluate the effects of surface treatment techniques on the shear bond strength (SBS) of Polyetheretherketone (PEEK) and Polyetherketoneketone (PEKK) polymers to composite resin. Eighty-eight ...
Effect of scan powder and scanning technology on measured deviations of complete-arch implant supported frameworks digitized with industrial and intraoral scanners

Donmez, Mustafa Borga; Cakmak, Gulce; Dede, Dogu Omur; Kucukekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda Lang; Revilla-Leon, Marta; Yilmaz, Burak (ELSEVIER SCI LTD-OXFORD, 2023)

Objectives: To evaluate the suitability of intraoral scanners (IOSs) to analyze the fabrication trueness of titanium complete-arch implant-supported frameworks by comparing with an industrial-grade scanner and investigate ...
Effect of sealant agents on the color stability and surface roughness of nanohybrid composite resins

Dede, Dogu Omur; Koroglu, Aysegul; Sahin, Onur; Yilmaz, Burak (MOSBY-ELSEVIER, 360 PARK AVENUE SOUTH, NEW YORK, NY 10010-1710 USA, 2016)

Statement of problem. The effect of sealant agents on the surface roughness and color stability of nanohybrid composite resins is unknown. Purpose. The purpose of this in vitro study was to evaluate the effect of sealant ...
Effect of simulated tootbrushing on surface roughness of sealant agent coupled nanohybrid composite resins

Halis, Gizem; Koroglu, Aysegul; Sahin, Onur; Dede, Dogu Omur; Yilmaz, Burak (WILEY-HOBOKEN, 2022)

Objective To investigate the effect of toothbrushing on the surface roughness (R-a) of different sealant agent coupled nanohybrid composite resins. Materials and Methods One hundred sixty disc-shaped (10 x 2 mm) specimens ...
Effect of surface sealant agents on the surface roughness and color stability of denture base materials

Dede, Dogu Omur; Koroglu, Aysegul; Sahin, Onur; Yilmaz, Burak (MOSBY-ELSEVIER, 360 PARK AVENUE SOUTH, NEW YORK, NY 10010-1710 USA, 2016)

Statement of problem. The effects of surface sealant agents on the surface roughness and color stability of denture base materials are unknown. Purpose. The purpose of this in vitro study was to evaluate the effects of ...
Effect of surface treatments on the bond strength between resin cement and differently sintered zirconium-oxide ceramics

Dede, Dogu Omur; Rona, Nergiz; Yenisey, Murat (ELSEVIER IRELAND LTD, ELSEVIER HOUSE, BROOKVALE PLAZA, EAST PARK SHANNON, CO, CLARE, 00000, IRELAND, 2016)

Purpose: This study investigated the effects of surface treatments on bond strength between resin cement and differently sintered zirconium -oxide ceramics. Methods: 220 zirconium -oxide ceramic (Ceramill ZI) specimens ...
Effect of surface treatments on the bond strength of indirect resin composite to resin matrix ceramics

Celik, Ersan; Dede, Dogu Omur; Sahin, Sezgi Cinel (KOREAN ACAD PROSTHODONTICS, #705 KOREA SCIENCE & TECHNOLOGY CENTER, 22 TAHRANNO 7 GIL, GANGNAMGU, SEOUL, 135-703, SOUTH KOREA, 2019)

PURPOSE. The purpose of this study was to evaluate the shear bond strength (SBS) of an indirect resin composite (IRC) to the various resin matrix ceramic (RMC) blocks using different surface treatments. MATERIALS AND ...
Effects of denture cleaning solutions on the retention of Hader bar clips

Kucukekenci, Ahmet Serkan; Dede, Dogu Omur; Celik, Ersan (MOSBY-ELSEVIER NEW YORK, 2021)

Statement of problem. The clinical performance of implant-retained overdentures (IODs) with plastic bar clips made of different materials in the same design and dimensions may vary according to the patient's daily home ...
Effects of Laser Treatment on the Bond Strength of Differently Sintered Zirconia Ceramics

Dede, Dogu Omur; Dede, Figen Ongoz; Rona, Nergiz; Yenisey, Murat (MARY ANN LIEBERT, INC, 140 HUGUENOT STREET, 3RD FL, NEW ROCHELLE, NY 10801 USA, 2016)

Objective: The purpose of this study was to investigate the effects of carbon dioxide (CO2) and Erbium-doped yttrium aluminum garnet (Er:YAG) laser irradiations on the shear bond strength (SBS) of differently sintered ...
Efficacy of denture cleaners on the surface roughness and Candida albicans adherence of sealant agent coupled denture base materials

Dede, Dogu Omur; Deniz, Sule Tugba; Koroglu, Aysegul; Ozkan, Serkan; Sahin, Onur; Sever, Nurdan Karacan (JAPANESE SOC DENTAL MATERIALS DEVICES, C/O KOKU HOKEN KYOKAI, 1-43-9 KOMAGOME TS BDG, KOMAGOME, TOSHIMA-KU, TOKYO, 170-0003, JAPAN, 2016)

This study investigated the effect of denture cleansers on the surface roughness and Candida albicans adherence of surface sealant agent coupled denture base resins. One hundred and twenty specimens were fabricated from 2 ...
Influence of abutment material and luting cements color on the final color of all ceramics

Dede, Dogu Omur; Armaganci, Arzu; Ceylan, Gozlem; Cankaya, Soner; Celik, Ersan (TAYLOR & FRANCIS LTD-ABINGDON, 2013)

Purpose. The purpose of this study is to evaluate the effects of different abutment materials and luting cements color on the final color of implant-supported all-ceramic restorations. Materials and methods. Ten A(2) shade ...
Influence of chairside surface treatments on the shear bond strength of PEKK polymer to veneering resin materials: An in vitro study

Dede, Dogu Omur; Kucukekenci, Ahmet Serkan; Kahveci, Cigdem (MOSBY-ELSEVIER NEW YORK, 2021)

Statement of problem. High-performance thermoplastics have been adopted as an alternative restorative material to metal or ceramics. However, a straightforward surface modification process to provide a durable bond strength ...
Influence of implant abutment material on the color of different ceramic crown systems

Armaganci, Arzu; Cankaya, Soner; Celik, Ersan; Ceylan, Gozlem; Dede, Dogu Omur; Yilmaz, Burak (MOSBY-ELSEVIER, 360 PARK AVENUE SOUTH, NEW YORK, NY 10010-1710 USA, 2021)

Statement of problem. Ceramics are widely used for anterior restorations; however, clinical color reproduction still constitutes a challenge particularly when the ceramic crowns are used on titanium implant abutments. Purpose. ...
Influence of implant abutment material on the color of different ceramic crown systems

Dede, Dogu Omur; Armaganci, Arzu; Ceylan, Gozlem; Celik, Ersan; Cankaya, Soner; Yilmaz, Burak (MOSBY-ELSEVIER-NEW YORK, 2016)

Statement of problem. Ceramics are widely used for anterior restorations; however, clinical color reproduction still constitutes a challenge particularly when the ceramic crowns are used on titanium implant abutments. ...
Influence of non-thermal plasma systems and two favorable surface treatments on the shear bond strength of PAEKs to composite resin

Dede, Dogu Omur; Ercan, Utku Kursat; Kucukekenci, Ahmet Serkan; Kahveci, Cigdem; Ozdemir, Gizem Dilara; Bagis, Bora (TAYLOR & FRANCIS LTD ABINGDON, 2022)

This study aimed to investigate the effect of non-thermal plasma systems with and without two favorable surface treatment techniques on the surface roughness (R-a) and shear bond strength (SBS) of polyaryletherketone (PAEK) ...

Now showing items 1-20 of 27

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Browsing Protetik Diş Tedavisi by Author "Dede, Dogu Omur"

Browsing Protetik Diş Tedavisi by Author "Dede, Dogu Omur"

Search DSpace

Browse

All of DSpace

This Collection

My Account