• Soft Set-Based Switching Faults Decision Making in DTC Induction Motor Drives 

  Turkmenoglu, Veli; Aktas, Mustafa; Karatas, Serkan; Okumus, Halil Ibrahim (WORLD SCIENTIFIC PUBL CO PTE LTD-SINGAPORE, 2015)

  This paper introduces a method for detection and identification of IGBT-based drive open-circuit fault of DTC induction motor drives. The detection mechanism is based on soft set theory and wavelet decomposition, if it is ...
• A two-stage stochastic model for workforce capacity requirement in shipbuilding 

  Kafali, Mustafa; Aydin, Nezir; Genc, Yusuf; Celebi, Ugur Bugra (TAYLOR & FRANCIS LTD-ABINGDON, 2022)

  Studies have been being carried out to make production faster and more organised in the shipbuilding industry, as in other industry. The fact that automation-based works are limited in the shipbuilding industry is one of ...
• On the wind and earthquake response of reinforced concrete chimneys 

  Turkeli, Erdem; Karaca, Zeki; Ozturk, Hasan Tahsin (TECHNO-PRESS-DAEJEON, 2017)

  Slender structures like reinforced concrete (RC) chimneys are severely damaged or collapsed during severe wind storms or strong ground motions all over the world. Today, with the improvement in technology and industry, ...
• Design of an assistant robot for alignment of fractured bones in medical operations 

  Cakiroglu, M. Selim; Sancaktar, Idris; Ulutas, Mustafa; Ertas, A. H. (TAYLOR & FRANCIS LTD-ABINGDON, 2014)
• Contribution of the Cogeneration Systems to Environment and Sustainability 

  Kemal, Comakli; Ugur, Cakir; Aysegul, Cokgez Kus; Erol, Sahin (SPRINGER INTERNATIONAL PUBLISHING AG-CHAM, 2018)
• Codends Selectivity for Bogue (Boops boops L., 1758) in the Eastern Mediterranean Demersal Trawl Fishery 

  Ilkyaz, Akin Turker; Sensurat, Tugce; Dereli, Hakki; Aydin, Celalettin (CENTRAL FISHERIES RESEARCH INST-TRABZON, 2017)

  This study investigated the selectivity of 90 degrees turned meshes of 40 mm mesh size with 165 meshes around codend circumferences (40T1), 44 mm meshes size with 300 meshes around codend circumferences (44T1) and 44 mm ...
• The impacts of negative problem orientation on perceived risk and travel intention in the context of COVID-19: a PLS-SEM approach 

  Sengel, Umit; Genc, Gokhan; Iskin, Merve; Cevrimkaya, Mustafa; Assiouras, Ioannis; Zengin, Burhanettin; Sariisik, Mehmet; Buhalis, Dimitrios (EMERALD GROUP PUBLISHING LTD-Leeds, 2022)

  PurposeThe COVID-19 pandemic, which appeared in China in late 2019, has affected the world psychologically, socially and economically in 2020. Tourism is one of the areas where the effects of COVID-19 have been felt most ...
• Perceptions of Turkish Forest Firefighters on In-Service Trainings 

  Safak, Ismail; Okan, Taner; Karademir, Devrim (MDPI-BASEL, 2023)

  Forest ecosystems in the Mediterranean Basin experience frequent forest fires, and the risk of hazards to people and assets is expected to increase in the face of climate change. Turkey is one of the countries in the ...
• A comparative study between zirconia and titanium abutments on the stress distribution in parafunctional loading: A 3D finite element analysis 

  Sivrikaya, Efe Can; Guler, Mehmet Sami; Bekci, Muhammed Latif (IOS PRESS-AMSTERDAM, 2020)

  BACKGROUND: Zirconia has become a popular biomaterial in dental implant systems because of its biocompatible and aesthetic properties. However, this material is more fragile than titanium so its use is limited. OBJECTIVES: ...
• Solar Calculations of Modified Arch (Semi-spherical)-Type Greenhouse System for Bayburt City 

  Ugur, Cakir; Erol, Sahin; Kemal, Comakli; Aysegul, Cokgez Kus (SPRINGER INTERNATIONAL PUBLISHING AG-CHAM, 2018)
• On the effect of eccentricity of a horizontal tube-in-shell storage unit on solidification of a PCM 

  Yazici, Mustafa Yusuf; Avci, Mete; Aydin, Orhan; Akgun, Mithat (PERGAMON-ELSEVIER SCIENCE LTD-OXFORD, 2014)

  Solidification characteristics of paraffin in a horizontal shell-and-tube type-storage system are investigated experimentally. The inlet temperature and the mass flow rate of the heat transfer fluid (HTF) are kept constant. ...
• Optimum design of partially prestressed concrete beams using Genetic Algorithms 

  Turkeli, Erdem; Ozturk, Hasan Tahsin (TECHNO-PRESS-DAEJEON, 2017)

  This paper deals with the optimum cost design of partially prestressed concrete I crosssectioned beams by using Genetic Algorithms. For this purpose, the optimum cost design of two selected example problems that have ...
• MEASUREMENT AND EVALUATION OF ELECTRIC FIELD STRENGTH LEVELS IN PRIMARY AND SECONDARY SCHOOLS IN A PILOT REGION 

  Kurnaz, Cetin; Engiz, Begum Korunur; Bozkurt, Murat Cem (OXFORD UNIV PRESS-OXFORD, 2018)

  In this study, in order to evaluate the exposed radiofrequency electromagnetic field (RF-EMF) levels, and to control their compliance with the limits determined by International Commission on Non-Ionizing Radiation Protection ...
• ENHANCING STORAGE PERFORMANCE IN A TUBE-IN SHELL STORAGE UNIT BY ATTACHING A CONDUCTING FIN TO THE BOTTOM OF THE TUBE 

  Aydin, Orhan; Avci, Mete; Yazici, M. Yusuf; Akgun, Mithat (TURKISH SOC THERMAL SCIENCES TECHNOLOGY-ANKARA, 2018)

  In this experimental study, melting behavior of paraffin in a storage unit of the horizontal shell-and-tube type is investigated. In order to enhance melting rate, a conducting fin is attached to the bottom of the inner ...
• Effect of eccentricity on melting behavior of paraffin in a horizontal tube-in-shell storage unit: An experimental study 

  Yazici, M. Yusuf; Avci, Mete; Aydin, Orhan; Akgun, Mithat (PERGAMON-ELSEVIER SCIENCE LTD-OXFORD, 2014)

  In this study, melting behavior of paraffin in a horizontal shell-and-tube type-storage unit is experimentally studied. Both the concentric and eccentric orientations of the inner tube according the center of the outer ...
• Optimum Design of Rc Retaining Walls with Key Section using Jaya Algorithm 

  Ozturk, Hasan Tahsin; Turkeli, Erdem (GAZI UNIV-ANKARA, 2019)

  In the traditional design process, the design starts with preliminary dimensions that may change by using engineering intuition after unfulfillment of necessary design conditions. By this way, the design is renewed with ...
• A Valid and Reliable Scale for Developing Programming-Oriented Computational Thinking 

  Kilic, Servet; Gokoglu, Seyfullah; Ozturk, Mucahit (SAGE PUBLICATIONS INC-THOUSAND OAKS, 2021)

  In this research, a scale was developed to determine the programming-oriented computational thinking skills of university students. The participants were 360 students studying in various departments at different universities ...
• Seismic assessment of historical masonry structures: The case of Amasya Tashan 

  Karaca, Zeki; Turkeli, Erdem; Pergel, Senol (TECHNO-PRESS-DAEJEON, 2017)

  Turkey owns a very important cultural and historical heritage that bears the traces of thousands of years of culture and civilization. It is an inevitable duty to carry these treasuries to the future generations. In this ...
• Determination of contact position of fractured bones and the applied force in external fixator applications 

  Sancaktar, Idris; Tuna, Burak; Ulutas, Mustafa (ELSEVIER - DIVISION REED ELSEVIER INDIA PVT LTD-NEW DELHI, 2018)

  In this article, we propose a new method for the estimation of the force, which is applied by two fractured parts of the bone on each other at the time of contact, while they are brought closer to each other, and the ...
• Monitoring of RF/Microwave Field Strength at Schools in a Pilot District in Samsun/Turkey 

  Kurnaz, Cetin; Engiz, Begum Korunur; Bozkurt, Murat Cem (IEEE-NEW YORK, 2016)

  As a result of the growing usage of wireless devices and a large number of WLANs installations at schools; determining the exposure levels to students and staff from these systems has become more crucial than before. Since ...

View more