Influence of chairside surface treatments on the shear bond strength of PEKK polymer to veneering resin materials: An in vitro study

Abstract

Statement of problem. High-performance thermoplastics have been adopted as an alternative restorative material to metal or ceramics. However, a straightforward surface modification process to provide a durable bond strength between the polymer and the veneering material is lacking. Purpose. The purpose of this in vitro study was to evaluate the shear bond strength (SBS) of different veneering resin materials to polyetherketoneketone (PEKK) after different surface treatments. Material and methods. Rectangular (7x7x2 mm) PEKK specimens (N=120) were randomly allocated to the following 6 groups (n=20): untreated (Cnt); nonthermal plasma (NTP) treated; tribochemical silica airborne-particle abrasion with 30 -mm silica-modified Al2O3 (Tbc); abraded with a coarse-grit diamond rotary instrument (Ab); tribochemical silica airborne-particle abrasion + plasma treated (Tbc_NTP); abraded + plasma treated (Ab_NTP). After a bonding agent (PEKK Bond) was applied to the specimens, each group was divided into 2 subgroups according to the applied veneering resin materials: polymethylmethacrylate (PMMA) and nanohybrid composite resin (NHC, n=10). The specimens were stored in water for 24 hours at 37 degrees C and subjected to the SBS test by using a universal testing machine, and failure modes were evaluated using a stereomicroscope. Two-way analysis of variance (ANOVA) was performed followed by the Tukey honestly significant difference (HSD) test to statistically analyze the data (a=.05). Results. The 2-way ANOVA showed that surface treatment methods, veneering material, and their interactions were significantly different on the SBS values (P<.001). The highest SBS values were determined for the Tbc and Tbc_NTP treatment groups not only for PMMA (10.71 to 11.63 MPa) but also for NHC (19.80 to 20.60 MPa) veneering resin materials (P<.05). Conclusions. The bonding capacity of PEKK to the PMMA and NHC veneering resin materials can be significantly improved by using tribochemical silica airborne-particle abrasion alone or with nonthermal plasma surface treatment techniques. Furthermore, using NHC veneering resin material is recommended over PMMA.